Model Cutting torch Types of weldings PRA ELITE, P.R.L. (at long preheating) Types of rails all
The engine-driven welder TS 300 KSX/EL is a professional machine with electronic control of the welding current capable of delivering up to 300 A with a duty cycle of 60%. Equipped with a KOHLER KD 477-2 diesel engine and an asynchronous alternator, it can be used simultaneously as a welder and as a three-phase and […]
The GE 3500 generator, portable and silenced, is equipped with a petrol engine and has a thermal protection in case of overload, an engine stop system in case of low oil level, a protective stretcher, 2 230V 16A sockets 2P + T Schuko, recoil starter, a single-phase alternator and an air cooling system. In according […]
The GE 4000 KDM generator, portable and silent, is equipped with: gasoline engine with recoil start, single-phase alternator, thermal protection in case of overcurrent, protective frame, 12 Vcc battery charger with fuse protection and 2x230V 16A 2P + T Schuko sockets. In according with CE regulation. Model GE 4000 KDM Engine […]
The GE 5000 HBM generator, portable and silent, is equipped with: gasoline engine with recoil start, engine stop system in case of low oil level, single-phase alternator, thermal protection in case of overcurrent, protective frame, 12 Vcc battery charger with fuse protection and 2x230V 16A 2P + T Schuko sockets. In according with CE regulation. […]
The GE S-6500 YDT generator has: Yanmar diesel engine with recoil or electric start, three-phase alternator, engine stop system in case of low oil level, magnetothermal switch, fuel gauge, protective cover and, optionally, ground fault interruptor or isometer. In according to CE regulations. Model GE S-6500 YDT Engine Yanmar/Diesel […]
The silenced GE S-8000 HBT generator has: recoil start Honda petrol engine, three-phase alternator, engine stop system in case of low oil level, magnetothermal switch, fuel gauge, protective cover and, optionally, ground fault interruptor or isometer. In according to CE regulations. Model GE S-8000 HBT Engine Honda/Petrol […]
This equipment has been designed to illuminate work areas in case of emergency or during night works and is composed of 4 halogen lights adjustable in different directions, 3-stage telescopic stainless steel pole that reaches a maximum height of 3 meters downhill braking. Furthermore, the platform is also equipped with 2 stabilizer bars, in order […]
This equipment has been designed to illuminate work areas in case of emergency or during night works and is composed of 6 halogen lights adjustable in different directions, 3-stage telescopic stainless steel pole that reaches a maximum height of 3 meters downhill braking. Furthermore, the platform is also equipped with 2 stabilizer bars, in order […]
This equipment has been designed to illuminate work areas in case of emergency or during night works and is composed of 5 halogen lights adjustable in different directions, 3-stage telescopic stainless steel pole that reaches a maximum height of 3 meters downhill braking. Furthermore, the platform is also equipped with 2 stabilizer bars, in order […]
Model Valve for oxygen Types of weldings PRA ELITE, P.R.L. (at long preheating) Types of rails all
Model Valve for propane Types of weldings PRA ELITE, P.R.L. (at long preheating) Types of rails all
Model Valve with 3 safety Types of weldings PRA ELITE, P.R.L. (at long preheating) Types of rails all
The New Magic Weld is able to weld any kind of electrode (rutile, basic, cellulose) up to 3,25 mm and takes full advantage of the engine’s power output thanks to a special technology known as “Power Optimizer”. The presence of an auto idle economizer introduces the concept of “power on demand”, allowing both fuel savings […]
The TS-200 BS/CF is a professional machine, without electronics capable of delivering up to 200 A with a duty cycle of 60%. The welding current is adjusted by changing the rpm of the engine. Equipped with an 11.1 HP HONDA GX-390 petrol engine and an asynchronous alternator, it can be used as a welder or […]
The welder generator TS-200 DES/CF is equipped with a YANMAR L100N diesel engine with electrical start-up and an asynchronous alternator. It can be used as a welder or as a three-phase and single-phase electrical generator up to 6 kVA. The welding current is continuous and has two welding scales (20-100A / 90-190A) that are selectable […]