The TFR 60 P rail drilling machine is an automatic machine suitable to drill rails with twisted drill bits. It’s robustness and power allow to drill up to 40mm using bits with morse type shank. Accessories are available to use even small diameter bits on the same mandrel. The engine is the well know Honda […]
This machine has been designed for tamping and compacting the ballast along the railway line and switches. It consists of a generator with a diesel engine on a trolley and gripping handles. It has also an electrical case included in the generator, with a control panel and safety switches for the tamper’s overheating. The blade of this […]
This machine has been designed for tamping and compacting the ballast along the railway line and switches. It consists of a generator with a petrol engine on a trolley and gripping handles. It has also an electrical case included in the generator, with a control panel and safety switches for the tamper’s overheating. The blade of […]
This machine has been designed for tamping and compacting the ballast along the railway line and switches. It consists of 2 tampers, a generator with a diesel engine on a trolley and gripping handles. It has also an electrical case included in the generator, with a control panel and safety switches for the tamper’s overheating. The blades […]
This machine has been designed for tamping and compacting the ballast along the railway line and switches. It consists of 2 tampers, a generator with a petrol engine on a trolley and gripping handles. It has also an electrical case included in the generator, with a control panel and safety switches for the tamper’s overheating. The […]
This machine has been designed for tamping and compacting the ballast along the railway line and switches. It consists of 4 tampers, a generator with a diesel engine on a trolley and gripping handles. It has also an electrical case included in the generator, with a control panel and safety switches for the tamper’s overheating. The […]
This machine has been designed for tamping and compacting the ballast along the railway line and switches. It consists of 4 tampers, a generator with a petrol engine on a trolley and gripping handles. It has also an electrical case included in the generator, with a control panel and safety switches for the tamper’s overheating. […]
Semi-automatic machine to assemble and disassemble bearings or TBU from/to the axles for maintenance. Thanks to its composition made by the basic machine, installer or remove interfaces and adaptors kit, this equipment can be used for any kind of axle, not only for the railway sector. It is an all in one machine on a […]
Semi-automatic machine to assemble and disassemble bearings or TBU from/to the axles for maintenance. Thanks to its composition made by the basic machine, installer or remove interfaces and adaptors kit, this equipment can be used for any kind of axle, not only for the railway sector. It is an all in one machine on a […]
Handy light equipment to dismount, handle and mount buffer from locomotives, coaches or wagons. It is designed to grant maximum security to the operator who is freed from heavy weights to carry during a particularly accurate operation. The complete maintenance operation can be performed by one operator only. The device is generally employed in the […]
Handy light equipment to dismount, handle and mount buffer from locomotives, coaches or wagons. It is designed to grant maximum security to the operator who is freed from heavy weights to carry during a particularly accurate operation. The complete maintenance operation can be performed by one operator only. The device is generally employed in the […]
A highly professional chainsaw in the segment of medium-sized machines, designed for the most demanding applications. Equipped with high-performance engine with low fuel consumption and low emissions of exhaust gases. The crankshaft and drive shaft are forged for maximum strength and the carburettor has a vibration damping system to manage speeds and high loads. This […]
This machine has been designed to perform tamping and compaction operations of the ballast along the railway lines and the switches. It consists of a mixture engine, an innovative suspension system and amortized grips, which greatly reduce the vibrations. It is light-weight and well balanced and these caractheristics assure long life to the machine. At […]
Designed to perform the shearing and removal of the excess of metal accumulated during the welding, leveling in a homogeneous way the portion of the welded rail. It consists of a powerful hand pump which moves two hydraulic cylinders with the mobile shearing blade applied on, that, during the removing of the material, leans against […]
Designed to perform the shearing and removal of the excess of metal accumulated during the welding, leveling in a homogeneous way the portion of the welded rail. It consists of a powerful hand pump which moves two hydraulic cylinders with the mobile shearing blade applied on, that, during the removing of the material, leans against […]
This machine is suitable to insert and extract Pandrol clips, working on both sides of the rail at the same time. The unit, powered by a sturdy and powerful diesel engine, consists of a high pressure hydraulic pump which feeds the two hydraulic cylinders, each equipped with an appropriate insection tool, used to insert and […]
This machine is suitable to insert and extract Pandrol clips, working on both sides of the rail at the same time. The unit, powered by a sturdy and powerful Honda petrol engine of new generation, consists of a high pressure hydraulic pump which feeds the two hydraulic cylinders, each equipped with an appropriate insection tool, […]
The double head hydraulic power wrench has been designed for screwing and unscrewing two wrenches at the same time. The termic engine of last generation with interchangeable filter and soundproofed silencer, controls the high pressure hydraulic pumps, that start the two hydraulic engines for screwing and unscrewing wrenches; the torque is indicated by two gauges […]
The double head hydraulic power wrench has been designed for screwing and unscrewing two wrenches at the same time. The termic engine of last generation with interchangeable filter and soundproofed silencer, controls the high pressure hydraulic pumps, that start the two hydraulic engines for screwing and unscrewing wrenches; the torque is indicated by two gauges […]
The double head vossloh e-clip machine has been designed for screwing and unscrewing two Vossloh clips at the same time. The termic engine of last generation with interchangeable filter and soundproofed silencer, controls the high pressure hydraulic pumps, that start the two hydraulic engines for screwing and unscrewing wrenches; the torque is indicated by two […]
The double head vossloh e-clip machine has been designed for screwing and unscrewing two Vossloh clips at the same time. The termic engine of last generation with interchangeable filter and soundproofed silencer, controls the high pressure hydraulic pumps, that start the two hydraulic engines for screwing and unscrewing wrenches; the torque is indicated by two […]
The main use of our MIT 70/2 hydraulic rail stressor takes place during welding procedures. This rail stressor is used for stressing, pressing or keeping two rails in neutral position, during welding procedures. With the “obstructionless configuration”, the railway vehicles can pass without get in touch with the machine. In addition, with the MIT 70/2 […]
This is a hydraulic machine used to bend different types of rail. It consists of a sturdy electrowelded steel structure with a hydraulic manual pump of 750 bar applied. At the ends of the structure there are two hydraulic cylinders with a force of 37.5 ton / each. In the terminal part of the stem, […]
It has been designed for performing, in complete safety, the aluminothermic welding of the rail. Its robust structure is able to withstand the high stress of the traction force. The gasoline Honda engine controls a hydraulic power unit with a gear pump of low pressure for a rapid approach of the rail and a radial […]
The main use of our MIT 70 hydraulic rail stressor takes place during welding procedures. This rail stressor is used for stressing, pressing or keeping two rails in neutral position, during welding procedures. With the “obstructionless configuration”, the railway vehicles can pass without get in touch with the MIT 70. It is composed by two […]
This rail stressor has been designed to approach and move the rails in complete safety and is composed of: -hydraulic power unit with tank included, inverter stoke tap, quick coupling hydraulic hoses, platform with padded base and lever of adequate size to work in safety conditions and with minimum effort for the operator; -hydraulic cylinder […]
This machine has been manufactured for shearing and removing the excess of metal accumulated during the welding, leveling in an homogeneous way the portion of the welded rail. It consists of a powerful hand pump, which moves two hydraulic cylinders with applied the shearing blade, which is easily replaceable so as to adapt the tool […]
This portable machine has been designed for drilling wooden sleepers, and its use is almost essential, especially in the absence of electric current. It consists of a direct drive engine, therefore, all power is transmitted to the bit and has sds plus quick coupling. The quick insertion of the bit, its balanced grip with safety […]
The maintenance hydraulic power wrench has been designed to lock and unlock wrenches, bolts and nuts for anchoring the rail to the sleepers. The hydraulic transmission is used for adjusting the tightening torque, which is indicated by a gauge on the frame. All movements are assisted by electro-sensors. A particular feature of this machine is […]
The maintenance hydraulic power wrench has been designed to lock and unlock wrenches, bolts and nuts for anchoring the rail to the sleepers. The hydraulic transmission is used for adjusting the tightening torque, which is indicated by a gauge on the frame. All movements are assisted by electro-sensors. A particular feature of this machine is […]
This rail stressor has been realized for performing, in complete safety, the aluminothermic welding of the rails. Its effectiveness has been more than proven by its maneuverability, reduced cost and easy operation. It consists of: – a robust structure able to withstand the high stress of the tensile force; – four interchangeable clamps for different […]
The purpose of this machine is to screw and unscrew wrenches, nuts and bolts for anchoring the rail to the sleeper. Its reduced weight and maneuverability guarantee precision and maximum safety for the operator. We can also supply a wide range of accessories such as: sockets, extensions and articulations. Model MAV 1000 E […]
Designed to screw and unscrew wrenches, screws and nuts and to anchor the rail to the sleeper, as well as in all those operations where, in the absence of electric current, it is necessary to tighten / loosen nuts, bolts, pins, etc. MAV 2200 B feature two 60V Li-ion batteries and advanced Brushless Motor (BLDC) […]
Designed to screw and unscrew wrenches, screws and nuts and to anchor the rail to the sleeper, as well as in all those operations where, in the absence of electric current, it is necessary to tighten / loosen nuts, bolts, pins, etc. In the ergonomic handle of rubber pads, designed to amortize vibrations, there are […]
MAV 4000 B Battery powered portable impact wrench
This machine FTP 950 E is light-weight and easy to use and has the purpose of quickly drilling wooden sleepers ensuring precision and maximum safety for the operator. It is composed of: • Electric engine; • Ergonomic handle with throttle button and engine safety lock; • Clockwise and counter-clockwise rotation of the drill bit; • […]
This machine is light-weight and easy to use and has the purpose of quickly drilling wooden sleepers, guaranteeing precision and maximum safety for the operator. It is composed of: • Kawasaki 2-stroke mixture engine; • High-strength speed reducer gears lubricated by special TK3 grease that guarantees excellent lubrication and long life; • Ergonomic handle with […]
This machine is light-weight and easy to use and has the purpose of quickly drilling wooden sleepers ensuring precision and maximum safety for the operator. It is composed of: • Honda 4-stroke petrol engine with valves at the top and special lubrication to work on 360°; • High-strength speed reducer gears lubricated by special TK3 […]
This machine has the mission of making precise cuts of the profiles of the most common rails. It has an electric engine and a reducer that transmits the movement to a blade of high quality steel, cooled by a suitable liquid. The positioning on the rail is done by placing the machine directly on the […]
This machine has the mission of making precise cuts of the profiles of the most common rails. It has a petrol engine and a reducer that transmits the movement to a blade of high quality steel, cooled by a suitable liquid. The positioning on the rail is done by placing the machine directly on the […]
The new K1270 rail comes with the patented X-Torq® engine that contributes to lower emissions and low fuel consumption without losing its original power. It has been designed for cutting any type of rail and it is composed of a powerful mixture engine, a clamp for anchoring the device on the track and a the […]
The new K1270 rail comes with the patented X-Torq® engine that contributes to lower emissions and low fuel consumption without losing its original power. It has been designed for cutting any type of rail and it is composed of a powerful mixture engine, a clamp for anchoring the device on the track and a the […]
The lightweight and easy to use TFR 330 B rail drilling machine is composed of an electric engine with battery and is suitable for drilling vignole and grooved rails. The advancing lever is directly connected to the engine and this system allows to use only the power which at that moment is necessary for the […]
The TFR 330 P rail drilling machine, which is lightweight and easy to use, is composed of a 4-stroke engine and is suitable for drilling vignole and grooved rails. The advancing lever is directly connected to the petrol engine. This system allows to use only the power which at that moment is necessary for the […]
Designed to carry out re-profiling of the rail head after welding. It is equipped with a diesel engine that is lubricated even when the machine is tilted by 90 °. The transmission from the engine to the spindle housing of the grinding stone is produced by a V-belt with a tension regulator. The protected action […]
Designed to make the re-profiling of the rail head after welding. It is equipped with an electric engine, which perfectly operates even when the machine is tilted by 90°. The transmission from the engine to the grinding stone happens thanks to a V-belt with a tensioner. The protected action of the belt, the grinding wheel […]
This grinding machine has been designed to carry out the re-profiling of the rail head after welding. This machine has a mixture engine, which is lubricated even when the machine is tilted by 90°. The transmission from the engine to the spindle housing of the grinding stone is done by a trapezoidal belt with tension […]
Designed to carry out the re-profiling of the rail head after welding. It is equipped with a lightweight petrol engine, which involves a low fuel consumption. It also has a continous forced cycle system of lubrification and carburation, which allows to tilt the machine by 90° and therefore the grinding of all the rail head. […]
Designed to make holes in wooden railway sleepers, it is provided with a lever mechanism by which the operator can adjust, in total safety, the drilling depth. Not exerting more pressure on the lever, the bit automatically returns into place. In addition, the machine has a light to work at night. With the machine we […]
Designed to make holes in wooden railway sleepers, it is provided with a lever mechanism by which the operator can adjust, in total safety, the drilling depth. Not exerting more pressure on the lever, the bit automatically returns into place. In addition, the machine has a light to work at night. With the machine we […]
Designed for locking and unlocking wrenches, bolts and nuts for anchoring the rail to the railway sleeper, during the preassembly and the railway armament bench phase. The hydraulic transmission is used for adjusting the tightening torque, which is indicated by a gauge on the crankcase. All movements are assisted by electro-sensors. A particular feature of […]
The MS 3600 has been designed for grinding of built-up welds on switch blades, crossing frogs, stock rails and check rails as well as for deburring rail heads and switches. Adjustment of grinding disc via ergonomically adjustable hand lever and hand wheels for precise guiding: It can be moved by 32 degrees to either side […]
This powerful machine has been designed for tamping and compacting the ballast both on tracks and on switches. It is equipped with a 4-stroke petrol engine and it includes innovative vibration-absorbing handles, which substantially reduce the vibrations transmitted to the body. It is a lightweight equipment and it is very easy to replace the tamping […]
This machine has been designed to lock and unlock wrenches, bolts and nuts for anchoring the rail to the sleepers. The hydraulic transmission is used to adjust the tightening torque, which is indicated by a gauge on the crankcase. All movements are assisted by electro-sensors. A particular feature of this machine is the processing speed, […]
This machine has been designed to lock and unlock wrenches, bolts and nuts for anchoring the rail to the sleepers. The hydraulic transmission is used to adjust the tightening torque, which is indicated by a gauge on the crankcase. All movements are assisted by electro-sensors. A particular feature of this machine is the processing speed, […]
This machine has been designed for screwing and unscrewing wrenches, bolts and nuts for anchoring the rail to the sleeper. It is equipped with a rotating head for tightening and loosening the fasteners of the railway jaws. The hydraulic transmission is used to adjust the tightening torque, which is indicated by a gauge on the […]
This machine has been designed for screwing and unscrewing wrenches, bolts and nuts for anchoring the rail to the sleeper. It is equipped with a rotating head for tightening and loosening the fasteners of the railway jaws. The hydraulic transmission is used to adjust the tightening torque, which is indicated by a gauge on the […]
The Yard mechanical bolting wrench BMC 1600 P is a very innovative unit with unique characteristics, which were unknown to the market before its introduction. The operator selects a range of tightening torque using a potentiometer located on the front part of the carter, which is connected to the electronic board that controls the electromagnetic […]
The mechanical power wrench IMC 1400 P has been designed to lock and unlock wrenches, bolts and nuts for anchoring the rail to the sleepers. The operator selects a range of tightening torque using a potentiometer located on the front part of the carter, which is connected to the electronic board that controls the electromagnetic […]
The mechanical power wrench IFC 1400 P has been designed to lock and unlock wrenches, bolts and nuts for anchoring the rail to the sleepers. It is also equipped with an easy and quick assembly kit to apply a spindle for the sleeper drilling bit. The operator selects a range of tightening torque using a […]